This guide explains mechanics — how jewellery works, how to secure it correctly, and how to prevent accidental loss.
Posts and attachments connect in one of two systems:
Threadless (pin) — compatible across most brands
Threaded (screw) — must be matched to the same brand
Mixing threaded brands can damage threads and may invalidate a manufacturer’s lifetime guarantee. If unsure, ask us.
Threadless jewellery is supplied with the pin pre‑bent (pins are kept straight only when used in curved posts).
How to secure:
Practice connecting and pulling apart before inserting.
Keep post and pin perfectly aligned when inserting.
Push firmly but gently until secure.
Important: Over‑bending pins can cause breakage and may not be covered by the manufacturer's lifetime guarantee.
Gently pull on the end — it should resist and feel secure.
Tighten using “righty‑tighty” (clockwise).
Secure firmly but never force.
How to check:
Periodically test with a gentle clockwise twist.
Seam rings must be opened and closed carefully to maintain their shape.
Never pull ends apart sideways — this weakens the ring and alters the diameter.
Use the S‑bend method: lay flat, twist one end towards you and the other away from you.
Jewellery can loosen gradually through daily wear, sleep and lifestyle.
Check fittings regularly
Be mindful after hair brushing, clothing changes and sleeping
Book a professional check if anything feels different
We’re always happy to check fit, secure jewellery, replace pins, clean professionally or advise on upgrades.
